GT2871R Ball Bearing Turbo Charger Wastegate. 64 A/R For Universal T25 Flange

  

GT2871R Ball Bearing Turbo Charger Wastegate. 64 A/R For Universal T25 Flange. GT2871R T25 Dual Ball Bearing Turbocharger 5-Bolt Flange with Internal Wastegate.

This GT28 71R Dual Ball Bearing turbocharger assembly is designed to be used on engines displacing 1.8L-3.0L and is typically good for around 400HP. They are also commonly used in twin turbo applications.

In this case those figures would be doubled 3.6L-6.0L engines up to 800HP. Horsepower ratings are generally meant to express the turbochargers maximum airflow capability. Recommended boost pressures are 7psi. 5 Bar to 21psi (1.5 Bar) and boost pressures should not exceed 30psi (2 Bar). Exceeding 21psi (1.5 Bar) of boost pressure can significantly reduce a turbochargers lifespan. Generally speaking 14psi (1 Bar) is good for a 100% increase in horsepower from a naturally aspirated engine. Also factory non-turbo engines without forged internal components on high octane pump gas (91-92 octane) it is not recommended exceeding 7psi. Doing so could result in damaging your engine. Capable of Boosting Horsepower Significantly. Constructed with High Quality Material: Cast Aluminum & Iron. Intake Inlet & Outlet: 3" & 2".

1x GT2871R T25 5-Bolt Flange Dual Ball Bearing Turbocharger. Hardware as Shown in the Picture Above. No Installation Guides Are Included, We Highly Recommend To Seek Professional Installation. Universal Fitment - (Recommended for 1.8L-3.0L Small Displacement Engines). Buyers outside of the U.

Please check with your country's government website. Tracking numbers are available as soon as they are created and processed. Please note that we are not responsible for any kind of delay if P. Box address or any other undeliverable addresses were provided. We do not offer local pick-ups.

Replacements will not be sent until the claim is approved. Instructions are not included unless stated in the description. It is highly recommended to seek professional installation as we are retailers of the parts and not trained technicians. We can provide minimal support, but do our best to support our customers.

NOTE: All of universal and turbo parts may require slight modification in order to fits perfectly. Most aftermarket items are produced for off-road and/or show purpose only.

These items are not suitable for regular driving. User must follow the directions given and any misuse of this product is at his/her own risk. The manufacturers, distributors, and retailers will not be held responsible for using this item other than specified above. The item "GT2871R Ball Bearing Turbo Charger Wastegate.

64 A/R For Universal T25 Flange" is in sale since Thursday, November 5, 2020. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts". The seller is "ajpdistributors" and is located in La Puente, California. This item can be shipped worldwide.

• Installation Guide: Not Included; Professional installation is highly recommended
• Intake Inlet / Outlet: 3" / 2"
• Brand Type: Aftermarket Branded
• Compressor Inducer / Exducer: 53.00 / 71.00
• Compressor Trim: 56
• Placement on Vehicle: Front, Left, Right, Rear
• Specifics: Additional Items / Modification Might Be Required to Install
• Exhaust Downpipe Flange: Standard T25 5-Bolt
• Turbine Trim: 76
• Turbine A/R: 0.64
• Compressor A/R: 0.60
• Notes: Recommended for 1.8L-3.0L Small Displacement Engines
• Other Part Number: Racing Track Drag Oil Cooled T25 Upgrade JDM Wastegate Waste Gate
• Warranty: Yes
• Fitment Type: Performance/Custom
• Bearing Type: Dual Ball Bearing
• Manufacturer Part Number: TBC-32251-271-V2
• Turbine Inducer / Exducer: 53.00 / 47.00
• Quantity: 1x GT2871R Dual Ball Bearing Turbocharger with Internal Wastegate
• Material: Cast Iron / Steel Turbo Housing / Aluminum Controller
• Brand: AJP Distributors
• Type: Turbo Charger
• Interchange Part Number: High Boost Performance Turbine Turbo Turbocharger Charger HP Gain
• Compatible/Replacement For: Universal T25 Manifold Applications
• Exhaust Turbo Manifold Flange: Standard T25 4-Bolt