63 57 TRIM 400+HP STAGE III TURBO CHARGER+OIL FEED+DRAIN LINE KIT. High Compression/ Boosting Turbocharger: The objective of a turbocharger is to improve the engine's volumetric efficiency by solving the amount of air flow into the combustion chamber limitation. This ultimately results in an increased torque and output of the engine. A naturally aspirated automobile engine uses only the downward stroke of a piston to create an area of low pressure in order to draw air into the cylinder through the intake valves.The pressure in the atmosphere is about 1 atm (approximately 14.7 PSI), so there ultimately will be a limit to the pressure difference across the intake valves. This will also limit the amount of airflow entering the combustion chamber. Since the turbocharger increases the pressure at the point where air is entering the cylinder, a greater mass of air (oxygen) will be forced in as the inlet manifold pressure increases. The additional air/oxygen flow makes it possible to maintain the combustion chamber pressure and fuel/air load even at high engine revolution speeds, increasing the power and torque output of the engine. Oil feed lines bring oil to the turbocharger, at the same time the oil cools and lubricates the moving parts. The Oil Drain Lines take the oil that has passed through the turbo and guides it back into the engines oil pan. Without these two components, the turbochargers internals would overheat or seize causing major complications. Oil feed and oil return lines feature stainless steel braiding to resist heat, pressure, and expansion of the lines. Each kit comes with andonized ends or fittings for a clean show quality professional look.
Capable of Boosting Horse Power up to 300+ BHP. Minimum Estimated Power Gain: 75 - 100 HP. High Quality Material, Cast Housing with Durable Steel.
3.00"/ 2.00". 50.50 / 76.00. 65.50 / 55.90.
36 Stainless Steel Braided Oil Feed Line. Stainless Steel Hose, Braided for Heat and Pressure Resistance, Strength and Durability. 1/8 NPT Fittings Natural Polish Finish.
CNC Machined Turbo Adapter Plate. Brass Fitting, Block Fitting, and Port Cover Included 0.5 ID Stainless Steel Braided Oil Drain Line.
Weldable 10AN Oil Pan Fitting Included. 1 x 1/8 NPT Turbo Oil Feed Line. 1 x Braided Turbo Oil Drain Line.
Hardware as Shown in the Picture Above. Professional Installation is Highly Recommended. Installation Instruction is NOT Included.
Video will open in a new window. DOMESTIC LOWER 48 US STATES. We are not responsible for incorrect or undeliverable addresses. Some of the packages cannot be delivered to a PO Box.Package will be held until a valid physical address is provided. For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing.
All items do not come with installation instruction unless otherwise specified. The item "T04E T3/T4 A/R. 63 57 TRIM 400+HP STAGE III TURBO CHARGER+OIL FEED+DRAIN LINE KIT" is in sale since Tuesday, March 31, 2015.
This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts". The seller is "speed_daddy" and is located in Rowland Heights, California. This item can be shipped worldwide.