Supplied With Two Spark Plug Wire Boots, Terminals And A Ballast Resistor. 100:1 Turns Ratio And Lower Primary Resistance Produce High Voltage Output. Chrome Metal Canister Is Filled With A Premium Grade Oil For Cooling. Package Weight (PG): 2.3. Primary Resistance: 0.7 Ohm.
Secondary Resistance: 4.5 Kilo Ohm. Ignition Coil; Blaster 2; Canister; 45000 Volts; 0.7 Ohms Primary Resistance/4.5K Ohms Secondary Resistance/100:1 Turns Ratio/8mH Inductance/140mA Peak Current/350uS Spark Duration; Red. If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice.
All of the blaster coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build up of voltage!
These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control.
Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application. The blaster 2 coils are supplied with a 0.8 Ohm ballast resistor and a terminal and boot to fit most applications. The ballast resistor must be used with stock points ignition and Mallory unilite applications.Our specialization is: delivering the best products & service in the fast manner possible. Thousands of positive feedbacks guaranty our quality. RA must be requested up to 30 days after the item is delivered. Any RA requested after the 30 day cutoff will be declined.
Incorrect/damaged merchandise MUST be reported 3 days after receiving the item. Any and all return requests will be handled at the discretion of Dvinternational company. By clicking the Place order button you are authorizing the above total to be billed to your card and the sale is final.NO CREDITS OR CHANGES CAN BE APPLIED ONCE YOUR ORDER IS CONFIRMED. By purchasing this item you verify that you have read and agree to all of out terms and conditions of sale.