Ford Country Squire

Powermaster 9507 Flathead Fits Ford Fits V8 Gear Reduction Starter

Powermaster 9507 Flathead Fits Ford Fits V8 Gear Reduction Starter
Powermaster 9507 Flathead Fits Ford Fits V8 Gear Reduction Starter
Powermaster 9507 Flathead Fits Ford Fits V8 Gear Reduction Starter
Powermaster 9507 Flathead Fits Ford Fits V8 Gear Reduction Starter
Powermaster 9507 Flathead Fits Ford Fits V8 Gear Reduction Starter
Powermaster 9507 Flathead Fits Ford Fits V8 Gear Reduction Starter

Powermaster 9507 Flathead Fits Ford Fits V8 Gear Reduction Starter    Powermaster 9507 Flathead Fits Ford Fits V8 Gear Reduction Starter

Features a 4.4:1 gear reduction ratio, Will bolt to original mounting points, Has cranking power for up to 18:1 compression, Can be mounted upside down for header clearance, Its small, compact size provides additional clearance. Powermaster 9507 Flathead Ford V8 Gear Reduction Starter. Powermaster XS Torque gear reduction starters are built using all new components and cranks out 200 ft. It bolts up like an original starter, but its gear-reduction design gives it more power to crank over high-compression engines.

Small, compact size provides additional clearance. Bolts to original mounting points.

Can be mounted upside down for header clearance. 4.4:1 gear reduction ratio. Cranking power for up to 18:1 compression.

Works with our steel, manual-shift flywheels. Will NOT work with our Aluminum.

Flywheel on a'48 or older Flatheads. If header clearance is an issue, this starter can be mounted upside down. It will not hang down too far and the cable hookup point can still be accessed on the back side. Drive depth is 1.562 (from the mounting flange to the tip of the drive fully extended).

Outer mounting flange is 4.5 O. Inner mount area is 3 O. With an outer to inner step of 7/16. 1.4 kW / 1.8 hp.

By johan on July 14, 2021. No, I would not recommend this product.

By Eli on April 21, 2018. Works mighty fine and starts fast. Yes, I recommend this product. By SAWDOFF on May 10, 2017.

I installed this starter in a 52 Merc. After converting the car to 12 volts.

It spins the motor over very fast making it easy to start. By Skinny on June 09, 2016. I originally ordered a different starter, I exchanged for this as it is period correct. I hit the key and the motor turned over instantly. I would recommend this to anybody using the Ford flathead. I got this to replace the direct drive s. By Jelsco on September 20, 2013.

Great little starter, it is a lot lighter than the motor it replaced. It is also quieter than the old one too.

Related Items / Suggested Parts. Speedway Stump Puller Flathead V8 Starter, Manual Trans. Powermaster 9508 French Block Flathead V8 Starter. CPP 4953WBK-S 1949-53 Ford Car Front Disc Brake Kit. Speedway Motors is America's Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 71 years.
Powermaster 9507 Flathead Fits Ford Fits V8 Gear Reduction Starter    Powermaster 9507 Flathead Fits Ford Fits V8 Gear Reduction Starter